Hypro Diaphragm Pump 9910-D252GRGI w/ Gear Reduction Insecticide Herbicide Pest

Description

This item is used and untested. Came on a Honda gx160 engine. Had to cut the crankshaft to remove. Selling as is...
ITEM DESCRIPTION
You are buying (1) Hydro Diaphragm Pump, model no. 910-D252GRGI (with Reduction System).
This medium pressure
diaphragm pump
is recommended for ground and low-level spraying of herbicides or pesticides commonly used by landscapers, greenhouse operators and pest control companies.
Hypro
medium pressure diaphragm pumps are recommended for spraying herbicides, pesticides, liquid fertilizers, and many other hard-to-handle fluids. Low-cost maintenance and almost wear-free operation make these pumps ideal for a wide variety of spraying jobs.
Pressure and output are designed for optimum performance of small to medium-sized sprayers. Hypro medium pressure diaphragm pumps can be adapted for male 1-3/8" splined shaft, female 1-3/8" splined shaft, 1" solid shaft, or gear reduction drive options. Pumps include a pulsation dampener.
9910-D252GRGI
- This version includes the gearbox and pressure regulator - 2 diaphragm pump - 3/4" HB inlet; 3/8" HB outlet; 5/8" HB Return line- 3/4" hollow shaft, gear reduced for 5 hp gas engine.  This model is your only solution to replacing a gearbox-driven pump
Low cost maintenance and almost wear-free operation make these pumps ideal for a wide variety of spraying jobs. Pressure and output are designed for optimum performance of medium to large sized sprayers.
The Hypro D252 diaphragm pump is designed to be the most complete pump for the spraying and pumping of herbicides, pesticides, liquid fertilizers and hard-to-handle fluids.
The oil bath design and premium-quality, synthetic diaphragms provide longer life and greater reliability.Low-cost maintenance and almost wear-free operation result from these diaphragms,as well as, a self-priming operation, and visual oil-level sight glass.
This Hypro D252 diaphragm pump can handle fluids up to 140 degrees F and can be run dry. Easily adaptable to PTO, hydraulic or gas engine drives.
The regulator is easily replaced, see below to order the control unit. ?When your pump has mixed oil (the oil in the sight glass is milky gray in color) do not run the pump any more, you need to change the diaphragms. Running a diaphragm pump with mixed oil will destroy the pump in a short period of time. This pump requires SAE 30 oil, commonly known as "30 weight" oil, non detergent, so no 10W30 in these pumps.
•    Max. flow: 6 gpm/ 22.7 L/min
•    Max. pressure: 290 psi/ 20.3 BAR
•    Max. rated speed: 650 rpm (D252), 3600 rpm (D252GRGI)
•    Max. fluid temperature: 140 degrees F
•    Port sizes on D252 - 3/4"HB inlet, 1/2" NPT outlet
•    Port sizes D252GRGI - 3/4" HB inlet, 3/8" HB outlet
•    Shaft on D252 is 3/4" solid
•    D252GRGI is 3/4"(see note above) hollow, gear reduced for gas engines
•    Diaphragms: 2, semi-hydraulic
•    Housing: anodized aluminum
•    Mounting base: included
•    9910-D252GRGI - This version includes the gearbox and pressure regulator - 2 diaphragm pump - 3/4" HB inlet; 3/8" HB outlet.
Other Attributes:
•    Port sizes: 3/4" HB inlet, 1/2" NPT outlet (D252); 3/8" HB outlet (all gear
reduction models)
•    Shaft (D252): 3/4" solid keyed
•    Shaft (D252GRGI): 3/4" hollow shaft with gear reduction for 2 to 3-1/2 hp
gasoline engine
•    Shaft (D252GRGI58): 5/8" hollow shaft with gear reduction for 2 to 3-1/2
hp gasoline engine
•    Shaft (D252GRGIAP): 3/4" hollow shaft with a 5/8" output shaft and gear
reduction for 3 hp gasoline engine
•    Housing: anodized aluminum
•    Diaphragms: 2, semi-hydraulic
•    Mounting base included
•    Crankcase Oil Capacity: 13 oz.
•    Weight: 12 lbs./5.4 kg (D252); 14 lbs./6.4 kg (all gear reduction models)