Ceylon Dried Tobacco Leaves Natural Organic Fresh Dried High-Quality 17Oz Leaf

Description

Ceylon Dried Tobacco Leaves  Natural Organic Fresh Dried High-Quality 17Oz Leaf
What are the Tobacco Leaves?
Whether it’s for ceremonial use, or for an insect repellent solution, there are many reasons to dry, or air-cure, your own tobacco leaves.
Drying tobacco is a kind of curing process that takes between 3 and 8 weeks to properly prepare the tobacco for use.
This method of curing will produce tobacco leaves that are, relative to other curing methods, low in sugar, high in nicotine, and sweet in flavor!
Find a shelter where you’ll have some control over the humidity by opening or closing doors, windows, or vents. You’ll need to keep the humidity relatively high to keep the leaves from drying too quickly.
Be sure the leaves are protected from direct sunlight, which may burn them.
How to Process Cigarette Tobacco Leaves
1. Before shredding your whole leaf tobacco from Leaf Only, remove the entirety of the main stem of your leaf. The easiest way to go about doing this is to pull the stem out and away from the top of the leaf. Grasp right beneath the apex of the leaf, and pull the stem out and down, away from the leaf.
2. After you have removed the main stem, lay out your de-stemmed leaf pieces on a flat surface until they reach optimal moisture levels. This is achieved when your leaf is dry, but not crisp.
Too dry and your method of shredding could turn your tobacco into dust, which is very difficult to make into cigarettes.
(This leaf was cracking and crumbling before de-stemming, and about half of the leaf was lost due to it being too dry.)
Too wet, and your tobacco will make clumpy cigarettes, and bind and damage machines that you run it through.
Do not worry! This is not difficult, and you will be able to tell the difference easily after a few tries. You want the leaf to be dry, but not cracking when you manipulate it.
3. This is the step where you can use a few different items depending on your financial situation, time, or desired cut or quality.
Coffee Grinder/ Food Processor/ Herb Grinder
These tools are similar, as they both cut the tobacco in flakes rather than fine shreds or strings.
When making RYO Cigarettes, the consistency of your tobacco is very important.
One of the things noticed when processing tobacco with a coffee grinder or food processor is that cigarettes will burn smooth, but your ember can fall off your cigarette because of the consistency of the tobacco – The strings of tobacco created when using a proper tobacco grinder will hold each other together and keep your ember on your cigarette. (Strings vs. flakes)
You can find all of these for a reasonable price at your local stores.
WARNING: A too fine of the grind of tobacco will make for cigarettes that won’t burn properly. (Runs, Canoeing, etc.
Leaf Only's Tobacco Shredder
We have used grinders, paper shredders, scissors, and many other items in an attempt to find a decent way to process tobacco leaves. We consider this product to be the Holy Grail for RYO and MYO cigarettes. It is an affordable, easy-to-use shredder that was designed specifically for grinding tobacco leaves.
First, start by clamping your Standard Cut Tobacco Shredder onto your table or surface.
Second, take the leaf halves you have made from the aforementioned steps, and run them through the machine one-half leave at a time.
Make sure to note the moisture level during this step, if your leaf is too moist going in you will clog the machine.
Then, break up the longer strands that came out of your shredder. You are looking for pieces between ½ and 1 ½ inch or 10-25mm long.
Lastly, depending on your preference, you'll want to run a portion of it through the machine again.
Most people are re-shred about half of what was first ground. This is by far the most affordable option there is, but is also the most labor-intensive
To start, take the halves you've made by removing the main tobacco stem.
Then take a few and stack them flat then fold them in half. After that roll it up and tuck any excess ends in.
What you do next is take your scissors and cut at a 45-degree angle. Make sure when you cut to get as deep in the scissors as you can as it makes an easy cut and more control.
Now it's all preference on how fine you enjoy it, I recommend 1-2mm.
Lastly, just like before, break up your tobacco into smaller strands.
That’s it! As you can see, it’s incredibly easy to shred your whole leaf tobacco!
All you need to do now is Make Your Own Cigarettes with Leaf Shredded from Leaf Only!
Product Shipping
DirectMart currently operates in Sri Lanka that provides our product distribution around the world. We always will be checked our items carefully and pack them in good condition before dispatching the product.
Items will be shipped within  1 - 7 business days when we received payment.
The arrival time depends on the destination and other factors.(This time may get longer due to special holidays and various clearance of customs department)
Delivery time usually will be 14- 30 days in most countries. If you didn't receive your item within this time schedule, please do not hesitate to contact us.
Contact Us
Welcome to contact us at any time if you have any problems.
We will do our best to help you and answer the questions within working hours. Communication is needed.
Please Contact Us First Before Leave Negative Or Neutral Feedback. Will Try Our Best To Resolve Your Problem
Payment Instructions
We accept PayPal.
All major credit cards are accepted through a secure payment processor Payoneer.
We accept Visa, Master Card, American Express and etc.
Product Return Options
We accept returns within 14 business days from item arrival.
All returned products should be in their original condition.
Please let us know within 3 days if you are returning the item.
The buyer should pay the return shipping charges. If you are not satisfied with the item or its conditions, please contact us first.
We will try to solve any dispute and try our best to make our customers fully satisfied.
Product Issues
If you have some issues with your purchase please let us know before opening an eBay case.
We are always committed to helping you and resolving any kind of issues with our product.
FeedBack
If you are satisfied with our service, please leave us 5-star positive feedback.
Your recognition will make us more confident to develop our business and serve you better.
Dear Sir/ Mrs...
Your happiness is my happiness. My hope is to be the best marketer in the future. I am responsible for that. I will be with you until you pick up the item. Let me know if there are any shortcomings. I would like to make up for the shortcomings and move on.
Thank You & Come Again...…..
Stay Safe. Be happy..