-40%

AMX Enova DGX 3200 Enclosure - video/audio switch - rack-mountable - New

$ 6309.57

Availability: 100 in stock
  • All returns accepted: ReturnsNotAccepted
  • Model: DGX3200
  • MPN: FG1061-32-FX
  • Brand: AMX
  • Condition: Brand new, never used, still in original packaging. Some wear and tear to packaging only.

    Description

    Enclosure only- Fast shipping.
    Unit has never been used, nor installed. Still in original packaging.
    The Enova DGX 32 enclosure includes higher wattage power supplies to increase the number of devices that can be powered over DXLink by the enclosure. This robust digital media switcher includes an integrated NetLinx controller, redundant power supplies and can be populated with Enova DGX video input and output boards. There are four connections per video board, and each enclosure holds eight video input boards and eight video output boards for a maximum matrix of 32 x 32. The Enova DGX 32 is capable of supporting 4K and Ultra High Definition (UHD) content.
    The Enova DGX 32 is far beyond a modular media switcher with built-in controller - it functions as the centerpiece of a complete integrated solution that manages and distributes analog and digital audio and video including HDMI/HDCP, control and Ethernet. Easily integrate HDCP into system designs and enjoy hassle-free Plug-and-Play operation. No tools, no delays and no key constraints - it just works with AMX's exclusive InstaGate Pro technology. Built for today's and tomorrow's needs, a comprehensive set of Enova DGX hot swappable boards can be used in conjunction with DXLink and DGX transmitters and receivers to provide an end-to-end distribution system over twisted pair cable or fiber. An integrated NetLinx controller and embedded Ethernet switch enables management of the entire solution including source equipment and display devices located throughout the environment - all from a single point of control.
    In addition to eliminating HDCP delays, InstaGate Pro allows traditionally key limited sources to be switched freely to all connected HDCP compliant displays - eliminating HDCP key limitations that plague large applications. Built-in SmartScale technology on every output provides video that is perfectly scaled for each connected display, eliminating the integration challenges that can occur when sources and displays have different supported resolutions - making it easy to specify, easy to install and easy to use. With the powerful combination of analog-to-digital signal conversion, video scaling and high speed digital switching the system delivers perfect video every time - regardless of signal type.
    Features
    HDMI/HDCP Switching
    – End-to-end distribution of HDMI/HDCP without interruption or key constraints using InstaGate Pro
    ®
    Technology
    4K and Ultra High Definition (UHD) Content Ready
    – Designed to support future resolutions for years to come
    HDCP Compliance Over Fiber
    – Compatible DXLink Fiber boards transmit uncompressed video, including HDCP protected content, up to 10 Km at 10 Gbps (single mode fiber options transmit 10 Km, multimode 300 m)
    Fiber Your Way
    – DXLink Fiber boards are available in single mode or multimode; simplex or duplex
    AV and Control over Twisted Pair, Fiber or Both
    – Send audio, video, bi-directional control and Ethernet over twisted pair or fiber cable, or integrate both into the same system
    Embedded NetLinx NX Integrated Control Processor
    – Allows any connected device to be managed, monitored or controlled
    Integrated Ethernet Switch
    – Pass Ethernet through the attached DXLink Twisted Pair or Fiber Transmitters and Receivers
    Analog to Digital Video Conversion with Scaled Outputs
    – Converts any source signal to digital and uses SmartScale Technology to automatically output video that is perfectly scaled for each connected display
    Onboard Web Configuration for all Aspects of the DGX System
    – Greatly simplifies the setup and configuration of Enova DGX systems including DXLink endpoints drastically reducing installation time
    Automatic Setup of DXLink Endpoints
    – Simplified installation by auto-discovering DXLink devices when they are connected to an Enova DGX
    Single IP Address Required for Multiple Endpoints
    – Reduces the need for IT administrators to provision numerous IP addresses across the system for transmitters and receivers
    Unrivaled Network Security
    – With Dual NIC to isolate AMX or third-party AV equipment from the primary network, IPv6 and wired 802.1X for protected network access, and user-defined LDAP login group support, the Enova DGX provides rock-solid security
    Independent Routing of Audio and Video Using Audio Switching Boards
    – Provides increased flexibility to combine and separate audio from video in a variety of applications
    AxLink Port
    – Makes it easier to connect AxLink devices like keypads directly to the Enova DGX
    InstaGate Pro Technology
    – Easily integrate HDCP into system designs and enjoy hassle-free matrix switching to all compliant displays. No tools, no delays, and no key constraints – it just works
    SmartScale Technology
    – Automatically responds to the display's declared EDID information and scales the video to the best resolution and video parameters for that display without manual setup; this prevents inferior video quality when sources are forced to lower resolutions to support the least capable display in the system
    DXLink Twisted Pair Input and Output Boards
    – HDCP Compliant boards send audio, video, control, Ethernet and power over one standard twisted pair cable up to 200 m – 100 m to the matrix switcher and 100 m after the matrix switcher, see the Cabling for Success with DXLink white paper for more details
    Easily Convert Analog to Digital Signals
    – Use the Enova DGX Digital Media Switcher in conjunction with DXLink Multi-Format Transmitters (Twisted Pair or Fiber), and easily integrate legacy analog sources and automatically convert their signals to digital
    Hot Swappable Video Input / Output Boards
    – Easily add or replace I/O boards at any time after deployment - the system automatically recognizes the new configuration and activates the boards
    3D Support
    – Pass through latest video formats including 3D and Deep Color
    Surround Sound Support
    – Pass through high definition surround sound including Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, and 2-channel through 8-channel L-PCM
    High Speed Digital Switching
    – 26 Gbps* ensures perfect pixel for pixel reproduction of video
    Fully Redundant Power Supplies With Independent Power Paths
    – Ensures maximum reliability for applications that require 24/7 uptime